Journal of the Korean Ceramic Society

Author Index

> Browse Articles > Author Index

Author is indexed since 2015

Author :

Young-Wook Kim

40 Articles

589

Effect of nitride addition on the electrical and thermal properties of pressureless solid-state sintered SiC ceramics

Rohit Malik, Young-Wook Kim

J. Korean Ceram. Soc. 2022;59(5):589-594. Published online February 17, 2022
DOI: https://doi.org/10.1007/s43207-022-00190-4

Cited By 2

581

Tribological Behavior of Silicon Carbide Ceramics - A Review

Sandan Kumar Sharma, B. Venkata Manoj Kumar, Young-Wook Kim

J. Korean Ceram. Soc. 2016;53(6):581-596. Published online November 30, 2016
DOI: https://doi.org/10.4191/kcers.2016.53.6.581

Cited By 42

467

Effect of Strontium Carbonate Content on Flexural Strength of Clay-Based Membrane Supports

Jung-Hye Eom, Young-Wook Kim, In-Hyuck Song

J. Korean Ceram. Soc. 2015;52(6):467
DOI: https://doi.org/10.4191/kcers.2015.52.6.467

Cited By 1

180

Effect of Alkaline-Earth Oxide Additives on Flexural Strength of Clay-Based Membrane Supports

Young-Il Lee, Jung-Hye Eom, Young-Wook Kim, In-Hyuck Song

J. Korean Ceram. Soc. 2015;52(3):180
DOI: https://doi.org/10.4191/kcers.2015.52.3.180

Cited By 1

Flexural Strength of Polysiloxane-Derived Strontium-Doped SiOC Ceramics

Jung-Hye Eom, Young-Wook Kim

J. Korean Ceram. Soc. 2015;52(1):61
DOI: https://doi.org/10.4191/kcers.2015.52.1.61

Cited By 3

380

Effect of Clay-Mineral Composition on Flexural Strength of Clay-based Membranes

Young-Il Lee, Jung-Hye Eom, Young-Wook Kim, In-Hyuck Song

J. Korean Ceram. Soc. 2014;51(5):380
DOI: https://doi.org/10.4191/kcers.2014.51.5.380

Cited By 5

416

Effect of Additive Composition on Flexural Strength of Cullet-Loess Tile Bodies

Young-Il Lee, Jung-Hye Eom, Young-Wook Kim, In-Hyuck Song

J. Korean Ceram. Soc. 2013;50(6):416
DOI: https://doi.org/10.4191/kcers.2013.50.6.416

Cited By 3

341

Processing of Kaolin-Based Microfiltration Membranes

Jung-Hye Eom, Young-Wook Kim, In-Hyuck Song

J. Korean Ceram. Soc. 2013;50(5):341
DOI: https://doi.org/10.4191/kcers.2013.50.5.341

Cited By 14

226

Low Temperature Processing of Nano-Sized Magnesia Ceramics Using Ultra High Pressure

Jeongho Song, Junghye Eom, Yunyoung Noh, Young-Wook Kim, Ohsung Song

J. Korean Ceram. Soc. 2013;50(3):226
DOI: https://doi.org/10.4191/kcers.2013.50.3.226

Effect of the C/Si Molar Ratio on the Characteristics of β-SiC Powders Synthesized from TEOS and Phenol Resin

Mi-Rae Youm, Sang-Whan Park, Young-Wook Kim

J. Korean Ceram. Soc. 2013;50(1):31
DOI: https://doi.org/10.4191/kcers.2013.50.1.31

Cited By 4

625

Effect of SiC Filler Content on Microstructure and Flexural Strength of Highly Porous SiC Ceramics Fabricated from Carbon-Filled Polysiloxane

Jung-Hye Eom, Young-Wook Kim, In-Hyuck Song

J. Korean Ceram. Soc. 2012;49(6):625
DOI: https://doi.org/10.4191/kcers.2012.49.6.625

Cited By 8

347

Processing of Vermiculite-Silica Composites with Prefer-Oriented Rod-Like Pores

Jung-Hye Eom, Young-Wook Kim, Seung-Seok Lee, Doo-Hoa Jeong

J. Korean Ceram. Soc. 2012;49(4):347
DOI: https://doi.org/10.4191/kcers.2012.49.4.347

Cited By 4

404

Investigation on the Properties of a Microcellular Light-Weighted Humidity Controlling Tile

In-Hyuck Song, Eun-Jung Lee, Hai-Doo Kim, Young-Wook Kim, Dal-Woong Yun

J. Korean Ceram. Soc. 2011;48(5):404
DOI: https://doi.org/10.4191/kcers.2011.48.5.404

Cited By 3

360

Flexural Strength of Macroporous Silicon Carbide Ceramics

Kwang-Young Lim, Young-Wook Kim, In-Hyuck Song, Ji-Soo Bae

J. Korean Ceram. Soc. 2011;48(5):360
DOI: https://doi.org/10.4191/kcers.2011.48.5.360

Cited By 6

546

Microstructure and Permeability Property of Si Bonded Porous SiC with Variations in the Carbon Content

In-Hyuck Song, Mi-Jung Park, Hai-Doo Kim, Young-Wook Kim, Ji-Soo Bae

J. Korean Ceram. Soc. 2010;47(6):546
DOI: https://doi.org/10.4191/kcers.2010.47.6.546

Cited By 11

529

Effect of Frit Content on Microstructure and Flexural Strength of Porous Frit-Bonded Al₂O₃ Ceramics

Kwang-Young Lim, Young-Wook Kim, In-Hyuck Song, Hai-Doo Kim, Ji-Soo Bae

J. Korean Ceram. Soc. 2010;47(6):529
DOI: https://doi.org/10.4191/kcers.2010.47.6.529

Cited By 3

515

Fabrication and Properties of SiC Candle Filter by Vacuum Extrusion and Ramming Process (II)

In-Sub Han, Doo-Won Seo, Se-Young Kim, Ki-Seog Hong, Sang-Kuk Woo, Young-Wook Kim

J. Korean Ceram. Soc. 2010;47(6):515
DOI: https://doi.org/10.4191/kcers.2010.47.6.515

Cited By 6

509

Effect of Template Content on Microstructure and Flexural Strength of Porous Mullite-Bonded Silicon Carbide Ceramics

Young-Hoon Choi, Young-Wook Kim, Sang-Kuk Woo, In-Sub Han

J. Korean Ceram. Soc. 2010;47(6):509
DOI: https://doi.org/10.4191/kcers.2010.47.6.509

Cited By 5

157

Effect of Starting SiC Particle Size on Nitridation and Strength of Silicon Nitride-Bonded Silicon Carbide Ceramics

Young-Hoon Choi, Young-Wook Kim, Sang-Kuk Woo, In-Sub Han

J. Korean Ceram. Soc. 2010;47(2):157
DOI: https://doi.org/10.4191/kcers.2010.47.2.157

Cited By 6

662

Fabrication and Properties of the SiC Candle Filter by Vacuum Extrusion and Ramming Process

Myung-Kwan Shin, In-Sub Han, Doo-Won Seo, Se-Young Kim, Sang-Kuk Woo, Seoung-Won Lee, Young-Wook Kim

J. Korean Ceram. Soc. 2009;46(6):662
DOI: https://doi.org/10.4191/kcers.2009.46.6.662

Cited By 5

520

Effect of Aluminum Addition on Porosity and Flexural Strength of Porous Self-Bonded Silicon Carbide Ceramics

Kwang-Young Lim, Young-Wook Kim, Sang-Kuk Woo, In-Sub Han

J. Korean Ceram. Soc. 2009;46(5):520
DOI: https://doi.org/10.4191/kcers.2009.46.5.520

Cited By 6

488

Low Temperature Processing and Properties of Porous Frit-Bonded SiC Ceramics

Su-Ho Chae, Young-Wook Kim, In-Hyuck Song, Hai-Doo Kim, Ji-Soo Bae, Sang-Moon Na, Seung-Il Kim

J. Korean Ceram. Soc. 2009;46(5):488
DOI: https://doi.org/10.4191/kcers.2009.46.5.488

Cited By 17

108

Investigation on the Pore Properties of the Microcellular ZrO₂ Ceramics Using Hollow Microsphere

Eun-Jung Lee, In-Hyuek Song, Hai-Doo Kim, Young-Wook Kim, Ji-Soo Bae

J. Korean Ceram. Soc. 2009;46(1):108
DOI: https://doi.org/10.4191/kcers.2009.46.1.108

Cited By 7

Effects of Template Size and Content on Porosity and Strength of Macroporous Zirconia Ceramics

Su-Ho Chae, Young-Wook Kim, In-Hyuek Song, Hai-Doo Kim, Ji-Soo Bae

J. Korean Ceram. Soc. 2009;46(1):35
DOI: https://doi.org/10.4191/kcers.2009.46.1.035

Cited By 13

537

Effect of Template Size Ratio on Porosity and Strength of Porous Zirconia Ceramics

Su-Ho Chae, Young-Wook Kim, In-Hyuek Song, Hai-Doo Kim, Ji-Soo Bae

J. Korean Ceram. Soc. 2008;45(9):537
DOI: https://doi.org/10.4191/kcers.2008.45.9.537

Cited By 4

430

Effect of Carbon Source on Porosity and Flexural Strength of Porous Self-Bonded Silicon Carbide Ceramics

Kwang-Young Lim, Young-Wook Kim, Sang-Kuk Woo, In-Sub Han

J. Korean Ceram. Soc. 2008;45(7):430
DOI: https://doi.org/10.4191/kcers.2008.45.7.430

Cited By 7

285

Effect of Si:C Ratio on Porosity and Flexural Strength of Porous Self-Bonded Silicon Carbide Ceramics

Kwang-Young Lim, Young-Wook Kim, Sang-Kuk Woo, In-Sub Han

J. Korean Ceram. Soc. 2008;45(5):285
DOI: https://doi.org/10.4191/kcers.2008.45.5.285

Cited By 5

204

Fabrication of SiC Fiber-SiC Matrix Composites by Reaction Sintering

Kwang-Young Lim, Young-Wook Kim, Ji-Yeon Park

J. Korean Ceram. Soc. 2008;45(4):204
DOI: https://doi.org/10.4191/kcers.2008.45.4.204

Cited By 4

Porosity Control of Porous Zirconia Ceramics

Su-Ho Chae, Jung-Hye Eom, Young-Wook Kim, In-Hyuek Song, Hai-Doo Kim, Ji-Soo Bae, Sang-Moon Na, Seung-Il Kim

J. Korean Ceram. Soc. 2008;45(1):65
DOI: https://doi.org/10.4191/kcers.2008.45.1.065

Cited By 9

349

Effect of the Processing Parameters on the Densification and Strength of 2D SiC Fiber-SiC Matrix Composites Fabricated by Slurry Infiltration and Stacking Process

Kwang-Young Lim, Doo-Hee Jang, Young-Wook Kim, Ji-Yeon Park, Dong-Soo Park

J. Korean Ceram. Soc. 2007;44(7):349
DOI: https://doi.org/10.4191/kcers.2007.44.7.349

Cited By 1

184

Synthesis of Microcellular Cordierite Ceramics Derived from a Preceramic Polymer

In-Hyuck Song, Young-Mi Kim, Hai-Doo Kim, Young-Wook Kim

J. Korean Ceram. Soc. 2007;44(5):184
DOI: https://doi.org/10.4191/kcers.2007.44.5.184

Cited By 4

230

Effects of Additive Composition and Content on Sintered Density and Compressive Strength of Cordierite Ceramics

Doo-Hee Jang, Kwang-Young Lim, Young-Wook Kim

J. Korean Ceram. Soc. 2007;44(4):230
DOI: https://doi.org/10.4191/kcers.2007.44.4.230

Cited By 7

189

Effect of Additive Composition on Fracture Toughness of In Situ-Toughened SiC−Si₃N₄ Composites

Young-Il Lee, Young-Wook Kim

J. Korean Ceram. Soc. 2007;44(4):189
DOI: https://doi.org/10.4191/kcers.2007.44.4.189

Cited By 1

552

Low Temperature Processing of Porous Silicon Carbide Ceramics by Carbothermal Reduction

Jung-Hye Eom, Doo-Hee Jang, Young-Wook Kim, In-Hyuck Song, Hai-Doo Kim

J. Korean Ceram. Soc. 2006;43(9):552
DOI: https://doi.org/10.4191/kcers.2006.43.9.552

Cited By 5

458

Processing of Cellular SiC Ceramics Using Polymer Microbeads

Sung-Hee Lee, Young-Wook Kim

J. Korean Ceram. Soc. 2006;43(8):458
DOI: https://doi.org/10.4191/kcers.2006.43.8.458

Cited By 16

327

Processing of Silica-Bonded Silicon Carbide Ceramics

Yong-Seong Chun, Young-Wook Kim

J. Korean Ceram. Soc. 2006;43(6):327
DOI: https://doi.org/10.4191/kcers.2006.43.6.327

Cited By 2

542

Possible Strategies for Microstructure Control of Liquid-Phase-Sintered Silicon Carbide Ceramics

Yong-Seong Chun, Young-Wook Kim

J. Korean Ceram. Soc. 2005;42(8):542
DOI: https://doi.org/10.4191/kcers.2005.42.8.542

Cited By 1

Effect of Additive Composition on Mechanical Properties of Silicon Carbide Sintered with Aluminum Nitride and Erbium Oxide

Sung-Hee Lee, Young-Wook Kim

J. Korean Ceram. Soc. 2005;42(1):16
DOI: https://doi.org/10.4191/kcers.2005.42.1.016

Cited By 2

229

Microstructure and Mechanical Properties of SiC-BN Composites with Oxynitride Glass

Young-Il Lee, Young-Wook Kim

J. Korean Ceram. Soc. 2003;40(3):229
DOI: https://doi.org/10.4191/kcers.2003.40.3.229

Cited By 4

1075

R-Curve Behavior of Silicon Carbide-titanium Carbide Composites

Hyun-Gu An, Young-Wook Kim

J. Korean Ceram. Soc. 2001;38(12):1075

Materials Science, Ceramics - Q1

Journal Impact Factor 2.5